Half-length seagull wing at the apex of the greenhouse
December 13, 2018
Cupola
December 13, 2018
Seagull wing
For mounting on greenhouses of 60 mm bar diameter with single or double plastic sheeting
For mounting on greenhouses of 60 mm bar diameter with single or double plastic sheeting
| FEATURES |
     |
| Dimensions |
Maximum height: 3.90 to 6 meterst Width: from 7.5 to 9 meters Internal side height: 2 - 2,25 - 2,5 meters |
| Construction |
Sendzimir arches diameter 48 mm x thickness 1.5 mm x length x 4.4 / 4.7 / 5 meters Hot-dip galvanized spacers diameter 27 mm x thickness 1.8 mm x length 2 / 2.25 / 2.5 meters Hot-dip galvanized anti-wind bracing bars diameter 27 mm x thickness 1.8 mm x length 3 meters Winding bars in the sides and ends of the greenhouse for rolling up the plastic sheeting in order to open up the structure and provide ventilation Diameter 32 mm x thickness 2 mm x length 6 meters with male/female joint Metal and PVC section bar strips for holding the plastic sheeting Complete 0.50 hp belt-operated reduction gearboxes Curved fretted metal sheeting for seagull wing openings |
| Optional |
Double plastic sheeting inflation kit consisting of: - Connection pipe - 220 V Motor - Positioning bracket - Flanges for double plastic sheeting Complete automatic management of the structure with a special electrical climate control unit (for wind, rain, temperature, humidity, heating, plastic sheeting inflation, etc.) |
| Gallery | download |
