Adaptable to any type of horticultural use, such as vegetable growing and nurseries.
FEATURES |
![]() ![]() ![]() ![]() ![]() |
Dimensions |
Height: 4 to 6 meters Width: 7.5 to 10 meters Distance between the lateral posts: 2 / 2.25 / 2.50 meters |
Description | This has been the leading product of Co.Ser. for nearly two decades as it is totally adaptable to any horticultural use, either as a nursery or for growing vegetables flowers and herbs, whether it be professionally or as a hobby. The structure can accommodate motorized openings, in the roof as well as at the sides and ends. Their complete automation, by means of special electrical panels equipped with climate control units created exclusively for purposes of modern agriculture make it an ideal product for every need. |
Construction |
Sendzimir semicircular arches diameter 60 mm x thickness 1.5 mm x length 8.4 / 8.8 / 9.4 / 10 meters Hot-dip galvanized lateral posts with a diameter of 60 mmx thickness 2 mm x length 2.8 / 3.2 / 4.2 / 4.8 meters Hot-dip galvanized anti-wind bracing bars Diameter 27 mm x thickness 1.8 mm x length 2.5 /3.0 / 3.5 meters Hot-dip galvanized end posts for both ends of the greenhouse (from 2 to 4 at each end of the greenhouse): 60 mm x thickness 2 mm x various different lengths. Reinforcement rods under the arch (from 1 to 11 depending on construction requirements) with thickness of 1.25 mm and diameter of 25 / 32 mm. Lateral reinforcement rods with a perimeter bar of 27 mm diameter or single or double U-shaped section bars as required. Manual or automatic lateral and frontal openings (at the ends and/or sides of the greenhouse) either vertically sliding (like sash windows) or with telescopic joints. Sendzimir galvanized gutters |
Central connection pole |
Batten ridge bar diameter 27 mm x thickness 1.8 mm x length 6 meters Sendzimir galvanized batten ridge bar diameter 32 mm x thickness 1.25 mm x length 2 / 2.25 / 2.50 meters |
Optional extras |
Manual or automatic roof openings (via cupola of plastic sheeting, corrugated cupola, AG, MAG, a sliding hatch, or with a telescopic joint). Sendzimir galvanized gutters Complete automatic management of the structure with a special electrical climate control unit (for wind, rain, temperature, humidity, heating, inflation of plastic sheeting, etc.) |
Gallery | download |
HALF-LENGTH SEAGULL WING
type of opening
SMALL DOME
type of opening
SEAGULL WING
type of opening
COMPLETELY RIGID
END PANEL
with door
ENDS MADE OF PLASTIC SHEETING
OR RIGID PLASTIC
capped by a lunette
REALIZATION OF MULTI-SPAN POLYTUNNELS ON REQUEST
ENDS MADE OF PLASTIC SHEETING OR RIGID PLASTIC
ENDS MADE COMPLETELY
OF PLASTIC SHEETING
Spacing between each arch (length of the bays): 2 meters / 2.25 meters / 2.50 meters.
Total width each polytunnel: varying from 6 to 10 meters.
Diameters of steel bars used: 25 mm / 27 mm / 32 mm / 48 mm / 60 mm Ø
Thicknesses of steel bars used: varying from 1.25 mm to 2.2 mm.